| Surface modification of PAN-based carbon fibers by coaxial atmospheric dielectric barrier discharge |
| 關鍵詞： |
plasma surface modification PAN-based carbon fiber dielectric barrier discharge |
| 類 別： |
纖維 >> 合成纖維 |
| 來 源： |
ICAFPM 2011 |
| 資料類型： |
pdf文件 |
| 資料大?。?/td>
| 2142K |
| 簡 介： |
A continuous coaxial atmospheric pressure dielectric barrier discharge plasma system (PLA-PLA) was used to modify the surface of PAN-based carbon fibers. The influence of plasma parameters on the surface of carbon fibers was investigated with respect to gas flow ratio and treatment time. The surface morphologies of carbon fibers before/after plasma processing were determined by scanning electron microscope (SEM), and the surface chemical composition of the fabric samples was analyzed by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The contact angle and tensile strength of the carbon fibers were also tested to investigate their wettability and mechanical properties. The results indicated that a large amount of reactive functional groups were introduced into the carbon fibers surface after the oxygen plasma treatment. In addition, the tensile strength of the treated fibers dropped little. |
| 上傳人： |
epce |
| 上傳時間： |
2011-10-08 13:41:33 |
| 下載次數： |
1 |
| 消耗積分： |
4 |
| 我要收藏： |
 |
| |
友情提示：下載后對該資源進行評論，即可獎勵2分。 |
|
本欄目部分資源來自互聯網，僅為促進數據共享和信息交流，如有版權問題請告知本網或上傳者本人，本網會及時給予答復。 |
| 報告錯誤
1.下載無效
2. 資料明顯無價值
3. 資料重復存在
|
